Jeiran Nafardastgerdi - Amirkabir University of Technology

Journal Papers

Portal Records

1

Abbas Kurkaani Barvaj, ُSayed Amir Mahdi Ghanadour, Jeiran Nafardastgerdi, Hamid Reza Ovesy, "Finite strip progressive damage analysis of relatively thick imperfect laminates under end-shortening strain", ACTA MECHANICA, July 2023 Vol. 23, Num. 23, Page 1-20, July 2023,

2

Jeiran Nafardastgerdi, Seyyed Omid Jaberi, Heikki Remes, Pauli Lehto, Hossein Hosseini Toudeshky, Jukka Kuva, "Fatigue damage process of additively manufactured 316 L steel using X-ray computed tomography imaging", Additive Manufacturing, April 2023 Vol. 70, Num. 103559, Page 1-18, April 2023,

3

Jeiran Nafardastgerdi, Seyyed Omid Jaberi, Heikki Remes, "Influence of internal and surface defects on the fatigue performance of additively manufactured stainless steel 316L", INTERNATIONAL JOURNAL OF FATIGUE, May 2022 Vol. 163, Num. 107025, Page 1-17, May 2022,

4

Jeiran Nafardastgerdi, Milad Lotf Yasouri, Hossein Hosseini Toudeshky, "Microstructure-sensitive investigation on the mechanical behavior of CNT-reinforced composites considering debonding damage based on cohesive finite element method", Materialstoday Communications, March 2022 Vol. 31, Num. 103458, Page 1-13, March 2022,

5

Jeiran Nafardastgerdi, Janne Koivisto, Olli Orel, Pantea Rava, Jarno Jukkinen, Mikko Kanerva, Minna Kelonmaki, "Comprehensive characterisation of the compressive behaviour of hydrogels using a new modelling procedure and redefining compression testing", Materialstoday Communications, June 2021 Vol. 28, Num. 102518, Page 1-14, June 2021,

6

Jeiran Nafardastgerdi, Fariborz Sheibanian, Heikki Remes, Hossein Hosseini Toudeshky, "Influences of Residual Stress, Surface Roughness and Peak-Load on Micro-Cracking: Sensitivity Analysis", Metals, February 2021 Vol. 11, Num. 320, Page 1-19, February 2021,

7

Jeiran Nafardastgerdi, Fariborz Sheibanian, Heikki Remes, Pauli Lehto, Hossein Hosseini Toudeshky, "Numerical modelling approach for considering effects of surface integrity on micro-crack formation", JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, September 2020 Vol. 175, Num. 106387, Page 1-13, September 2020,

8

Jeiran Nafardastgerdi, Behnam Anbarlooie, Arttu Miettinen, Hossein Hosseini Toudeshky, Heikki Remes, "Effect of particle clustering on the plastic deformation and damage initiation of particle reinforced composite utilizing X-ray CT data and finite element modeling", COMPOSITES PART B-ENGINEERING, July 2018 Vol. 153, Num. 0, Page 57-69, July 2018,

9

Jeiran Nafardastgerdi, Arttu Miettinen, Juni Parkkonen, Heikki Remes, "Multiscale microstructural characterization of particulate-reinforced composite with non-destructive X-ray micro- and nanotomography", COMPOSITE STRUCTURES, April 2018 Vol. 194, Num. 0, Page 292-301, April 2018,

10

Jeiran Nafardastgerdi, Gary Marquis, Behnam Anbarlooie, Sankaranarayanan, Manoj Gupta, "Microstructure-sensitive investigation on the plastic deformation and damage initiation of amorphous particles reinforced composites", COMPOSITE STRUCTURES, May 2016 Vol. 142, Num. 142, Page 130-139, May 2016,

11

Jeiran Nafardastgerdi, Behnam Anbarlooie, Saeid Marzban, Gary Marquis, "Mechanical and real microstructure behavior analysis of particulate reinforced nanocomposite considering debonding damage based on cohesive finite element method", COMPOSITE STRUCTURES, December 2014 Vol. 122, Num. 122, Page 518-525, December 2014,

12

Jeiran Nafardastgerdi, Gary Marquis, Mahmoud Salimi, "Micromechanical modeling of nanocomposites considering debonding of reinforcements", COMPOSITES SCIENCE AND TECHNOLOGY, January 2014 Vol. 93, Num. 93, Page 38-45, January 2014,

13

Jeiran Nafardastgerdi, Gary Marquis, Mahmoud Salimi, "Micromechanical modeling of nanocomposites considering debonding and waviness of reinforcements", COMPOSITE STRUCTURES, November 2013 Vol. 110, Num. 110, Page 1-6, November 2013,

14

Jeiran Nafardastgerdi, Gary Marquis, Mahmoud Salimi, "The effect of nanotubes waviness on mechanical properties of CNT/SMP composites", COMPOSITES SCIENCE AND TECHNOLOGY, July 2013 Vol. 86, Num. 86, Page 164-169, July 2013,

Conference Papers

Portal Records

1

Jeiran Nafardastgerdi, Milad Lotf Yasouri, Heikki Remes, "Damage process of additively manufactured stainless steel 316L under tensile loading in the presence of process-induced defects ", 3RD INTERNATIONAL CONFERENCE ON ADVANCED JOINING PROCESSES, October 2023

2

Johanna Muller, Jeiran Nafardastgerdi, Jonas Hensel, "Comparison of fatigue test results of high strength steel DED-arc specimens with milled and unmilled surfaces ", 76th IIW Assembly and International Conference on Welding and Joining, July 2023

3

Jeiran Nafardastgerdi, Mohammad Sajad Goodarzi, "Effect of heterogeneous distribution of reinforcing particles on the mechanical behavior of lightweight metal matrix composites reinforced with amorphous particles ", 21st International Conference On Iranian Aerospace, February 2023

4

Jeiran Nafardastgerdi, Ramin Darooee, "Ductile fracture mechanism considering anisotropic mechanical behavior of stainless steel 316L fabricated by direct laser sintering additive manufacturing method ", 21st International Conference On Iranian Aerospace, February 2023

5

Jeiran Nafardastgerdi, Seyyed Omid Jaberi, Heikki Remes, "Study of defect characteristics and their effect on the fatigue performance of metal additive manufactured components using X-ray computed tomography ", 74th IIW on-line Assembly and International Conference, July 2021

6

Jeiran Nafardastgerdi, "Clustering effect on strengthening mechanisms of particulate reinforced composites using X-ray micro-tomography data ", The 19th International Conference of Iranian Aerospace Society, May 2021

7

Farah Behnam, Jeiran Nafardastgerdi, Heikki Remes, ّFilip Mutignani, Filippo Berto, "Influence of hot deep galavanizing on fatigue behavior of welded steel joints ", 18th international conference of Iranian Aerospace society, February 2020

8

Jeiran Nafardastgerdi, Jussi Virkajarvi, Heikki Remes, Hossein Hosseini Toudeshky, "Damage investigation of particulate reinforced composite from X-ray tomography in-situ fatigue test ", The 7th international conference on the fatigue of composites, July 2018

Taught Courses

#

Course title

Description

Headlines

Date

1

Fatigue of Structures

Learning objectives: After the course, you • understands the material behavior under cyclic loading and fatigue phenomenon. • can identify the main affecting factors and requirements for fatigue assessment. • understands the main modeling princ

Fall 2023

2

Statics

In this course students will learn a process for analysis of static objects; concepts of force, moment, and mechanical equilibrium; how to analyze forces and moments in two and three dimensions; and how to analyze distributed forces and internal load

Fall 2023

3

Statics

In this course students will learn a process for analysis of static objects; concepts of force, moment, and mechanical equilibrium; how to analyze forces and moments in two and three dimensions; and how to analyze distributed forces and internal load

Spring 2023

4

Structural Des. of Aircraft

The purpose of the course is to provide an understanding of the structure that makes up the airframe itself and to teach the principles of solid and structural mechanics that can be used to design and analyze aerospace structures, in particular aircr

Spring 2023

5

Continuum Damage Mechanics of Composite Materials

The basic principles underlying both the micromechanics approach and the continuum damage mechanics approach reviewing the relevant statistical concepts have been presented in this course to study the damage phenomenon in composites materials. This

Spring 2023

6

Statics

In this course students will learn a process for analysis of static objects; concepts of force, moment, and mechanical equilibrium; how to analyze forces and moments in two and three dimensions; and how to analyze distributed forces and internal load

Fall 2022

7

Fatigue of Structures

Learning objectives: After the course, you • understands the material behavior under cyclic loading and fatigue phenomenon. • can identify the main affecting factors and requirements for fatigue assessment. • understands the main modeling princ

Fall 2022