S.REZA GHAFFARIAN ANBARAN - Amirkabir University of Technology

Investigation of process parameters and materials of the production process of expanded polypropylene in the presence of kaolin nanoparticles as a stabilizer

Sina Bazrpash & S.Reza Ghaffarian Anbaran

October 2022

Investigation of the synthesis of phenolic resin - substituted resol in the para position - in order to improve the vulcanization of some rubbers, including butyl rubber

Masoud Tavakoli Dare & S.Reza Ghaffarian Anbaran

September 2022

Improving the properties of polymer-wood filament by preimpregnation for the production of polymer-wood composite by FDM 3D printing.

Mehdi Gholami & S.Reza Ghaffarian Anbaran

February 2022

Study of process parameters and materials in the production of laminate cell composite through compression molding of polyolefin foams and investigation of structural, dimensional and adhesion stability between layers.

Saeid Khodaei & S.Reza Ghaffarian Anbaran

October 2021

Curing Induced Phase Separation and Carbon Black Nano-assembly in Epoxy Resin

Hoda Mahjub & S.Reza Ghaffarian Anbaran

September 2021

synthesis polyaniline/titanium dioxide/Geraphene gas sensor for food spoilage detection

Shaghayegh Haghighat & S.Reza Ghaffarian Anbaran

September 2021

Improving ductility of composite bars with experimental test

Mohammad Amin Mirdarsoltany & S.Reza Ghaffarian Anbaran

August 2021

Manufacturing of wood-polymer composites based on PLA via 3D-printing method/ investigating the processing and material conditions

Parisa Vahedi & S.Reza Ghaffarian Anbaran

February 2021

Preparation and characterization of biocompatible acrylate resin application in 3D printers with photocure ability to fabricate soft tissue substitute implants

Alireza Keyhanzadeh & S.Reza Ghaffarian Anbaran

January 2021

Synthesis and evaluation of rheological behavior of supramolecular block copolymers

Erfan Yari & S.Reza Ghaffarian Anbaran

December 2020

experimental study of the design and construction of polyurethane foam filled with shock absorbing borated silicone superamolecule materials

Hamidreza Shadman & S.Reza Ghaffarian Anbaran

September 2020

Investigation of grafting of dangling chains to polyurethane networks and the effect of structural and process parameters on surface properties of the coatings

Abolfazl Golmohammadian Tehrani & S.Reza Ghaffarian Anbaran

September 2020

Preparation and evaluation of gaseous sensor performance based on polyaniline deposited on electrospun fibers containing metal oxide nanoparticles, for detection of volatile nitrogenous compounds produced in spoiled fishery products

Reyhane Jahangiri Esfahani & S.Reza Ghaffarian Anbaran

August 2020

investigation on microwave assisted solid-state microcellular foaming of PE/PE composites containing CNT nanoparticles

Mohammad Hassan Aghvami Panah & S.Reza Ghaffarian Anbaran

February 2020

preparation and evaluation of gaseous sensor performance based on polyaniline deposited on electrospun fibers containing CNT for detection of volatile nitrogenous compounds produced in spoiled fishery products

Fatemeh Teimoury & S.Reza Ghaffarian Anbaran

February 2020

experimental and theoritical investigation of microstructure evaluation of nanocomposites based on epoxy and polyflourine resins containing nanofiller during crosslinking

Armita Sharifi & S.Reza Ghaffarian Anbaran

July 2019

Investigation of Solid-State Microcellular Foaming Mechanism of Thermoplstics Rreinforced with Fiber and Nanoparticle

Mehrnaz Shahbazi & S.Reza Ghaffarian Anbaran

February 2019

Electrospinning of supramolecular based on UPy

Bahar Bazeli & S.Reza Ghaffarian Anbaran

February 2018

Investigating the effect of processing parameters and conditions in the manufacturing of selective conductive polymer nanocomposite by fused deposition in 3D printing

Keyvan Garoosi & S.Reza Ghaffarian Anbaran

February 2018

Microstructure and mechanical properties of polypropylene/ polypropylene and polypropylene/ aluminum 2024 friction stir welds

Seyed Ali Moochani & S.Reza Ghaffarian Anbaran

January 2018

Manufacturing of Supramolecular NanoComposites Based on Chitosan and Graphene Oxide/CNT

Pouria Falamarzpour & S.Reza Ghaffarian Anbaran

October 2017

design and fabrication of polymer/CNT conductive nano composite vapor sensors to detect H2S gas

Arezoo Dashti & S.Reza Ghaffarian Anbaran

February 2017

Optimization of piezoelectric in FGM cylindrical panel with PFRC layers using genetic algorithms

Saman Mohammad Nabi & S.Reza Ghaffarian Anbaran

October 2014

Investigating reversibility of ionic secondary bond in supramolecules

Amin Javani & S.Reza Ghaffarian Anbaran

February 2014

Investigating the effect of sulfon-modified nano particles in ion exchange membranes for fuel cell application

Seed Amadodin Shakeri & S.Reza Ghaffarian Anbaran

October 2013

Investigation of impact properties in microcellular pp/pp composite

Ali Ghafury Vaighan & S.Reza Ghaffarian Anbaran

October 2013

Investigation the effect of azolic modified nanoparticles on the performance of ion exchange nanocomposite membranes for fuel cell applications

Mahdi Tohidian & S.Reza Ghaffarian Anbaran

September 2013

Synthsis of carbon foam & investigation the effect of processing parameters on its micro structure & mechanical properties

Hooman Hosseini & S.Reza Ghaffarian Anbaran

February 2013

Investigation of crystallization self-reinforced polypropylene composites with nanoclay particles and the effect of microcellular foaming on their crystallization structure

Seyfolah Jamalpour & S.Reza Ghaffarian Anbaran

November 2012

Investigating the material and process parameters on manufacturing of polypropylene/polypropylene microcellular composite with nanoclay particles

Seyyed Tohid Ghaznavi & S.Reza Ghaffarian Anbaran

October 2012

Investigation of reversible bonds presence on the performance of smart electro- active mendable structures

Amir Jangi Zehi & S.Reza Ghaffarian Anbaran

February 2012

Synthesis of side - chain cholesteric liguidcrystal polymers based on acrylic backbone and investigation of the effct of chiral

Mahdi Roohnikan & S.Reza Ghaffarian Anbaran

January 2012

Study of mutual effect of crystallinity ,nucleation and growth in polyethylene nanocomposite microcellular foams

Elham Rezvan Panah & S.Reza Ghaffarian Anbaran

January 2012

synthesis of cured microporous polyurethane with appropriate mechanical properties as electro-active actuator

Zahra Khubi Arani & S.Reza Ghaffarian Anbaran

January 2011

the effectof magneto lonic nanoparticles on the performance of electroactive polymerr nanocomposite based on IPMC

Noushin Hasanabadi & S.Reza Ghaffarian Anbaran

January 2011

Functionalization of magnetic nanoparticle with molecular structure

Shohreh Asgari & S.Reza Ghaffarian Anbaran

October 2010

Investigations on the effect of crosslinking and nano reinfocement on the ipccs matrix performance

Nassir Mokarram Dorri & S.Reza Ghaffarian Anbaran

March 2009

Effect of porosity on the response of the vapor sensors based on cellular nanocomposites with acrylic matrix

Ehsan Danesh & S.Reza Ghaffarian Anbaran

January 2009

STUDY OF SOME OF THE PROCESSING PARAMTERS ON THE PRODUCTION OF MICROCELLULAR NANO REINFORCED PET

Hossein Izadi Vasafi & S.Reza Ghaffarian Anbaran

June 2008

INVESTIGATION ON THE ROLE OF LAMINATING ON SHORT TIME EFFICIENCY OF MICRO GENERATORS BASED ON EAP SMART COMPOSITES

Davoud Zamani & S.Reza Ghaffarian Anbaran

December 2007

DESIGN AND MANUFACTURING OF LINEAR ACTUATOR BASED ON SMART ELECTERO-ACTIVE COMPOSITES

Narges Yousefi Mehr & S.Reza Ghaffarian Anbaran

October 2007

HIGH CARBON YIELD CARBON FOAM PRECURSER SYNTHESIS AND STUDY ON SOME EFFECTIVE PROCESSING PARAMETER ON FOAM CELL MORPHOLO

Ata Taghizadeh & S.Reza Ghaffarian Anbaran

March 2007

Journal Papers

Portal Records

, Farhad Sharif, S.Reza Ghaffarian Anbaran, "Tailor-Made Functional Polyolefins of Complex Architectures: Recent Advances, Applications, and Prospects", MACROMOLECULES, August 2022 Vol. 55, Num. 16, Page 6938-6972, August 2022,

Mahdi Tohidian, S.Reza Ghaffarian Anbaran, "Polyelectrolyte nanocomposite membranes based on chitosan and surface modified multi-walled carbon nanotubes for use in fuel cell applications", JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, July 2021 Vol. 58, Num. 11, Page 778-791, July 2021,

Abolfazl Golmohammadian Tehrani, Hesam Makki, S.Reza Ghaffarian Anbaran, Helma Vakili, Hassan Ghermezcheshme, Nooshin Zandi, "Superior anti-biofouling properties of mPEG-modified polyurethane networks via incorporation of a hydrophobic dangling chain", PROGRESS IN ORGANIC COATINGS, June 2021 Vol. 158, Num. 1, Page 106358-106358, June 2021,

Azam Alsadat, Sardari Zarandi, Aliasghar Sabbagh Alvani, S.Reza Ghaffarian Anbaran, "Preparation of castor oil-based fatliquoring agent via a Pickering emulsion method for use in leather coating", Journal of Coatings Technology and Research, July 2019 Vol. 0, Num. 0, Page 1-8, July 2019,

, S.Reza Ghaffarian Anbaran, Hesam Yademellat, Hossein Heidary, "Finding the best sequence in flexible and stiff composite laminates interleaved by nanofibers", JOURNAL OF COMPOSITE MATERIALS, June 2019 Vol. 53, Num. 0, Page 4065-4076, June 2019,

Azam Alsadat, Sardari Zarandi, Aliasghar Sabbagh Alvani, S.Reza Ghaffarian Anbaran, "Castor oil-derived water-based polyurethane coatings: Structure manipulation for property enhancement", PROGRESS IN ORGANIC COATINGS, April 2019 Vol. 133, Num. 0, Page 198-205, April 2019,

Azam Alsadat, Sardari Zarandi, Aliasghar Sabbagh Alvani, S.Reza Ghaffarian Anbaran, "Synthesis and Characterization of Novel Castor Oil-Based Polyol for Potential Applications in Coatings", Journal of Renewable Materials, February 2019 Vol. 7, Num. 1, Page 31-40, February 2019,

Seyed Ali Moochani, Hamid Omidvar, S.Reza Ghaffarian Anbaran, Seyed Mohammad Goushegir, "Friction stir welding of thermoplastics with a new heat-assisted tool design: mechanical properties and microstructure", Welding in the World, January 2019 Vol. 63, Num. 1, Page 181-190, January 2019,

Amir Jangizehi, S.Reza Ghaffarian Anbaran, Willi Schmolke, Sebastian Seiffert, "Dominance of Chain Entanglement over Transient Sticking on Chain Dynamics in Hydrogen-Bonded Supramolecular Polymer Networks in the Melt", MACROMOLECULES, April 2018 Vol. 51, Num. 8, Page 2859-2871, April 2018,

Amir Jangizehi, S.Reza Ghaffarian Anbaran, Goolia Nikravan, Seifolah Jamalpour, "Thermal and viscoelastic properties of entangled supramolecular polymer networks as a powerful tool for prediction of their microstructure", THERMOCHIMICA ACTA, March 2018 Vol. 661, Num. 0, Page 34-40, March 2018,

Reza Eslami, S.Reza Ghaffarian Anbaran, Manouchehr Salehi, Mehdi Rafizadeh, "Evaluation of non-Einstein rheology behavior of soft nanoparticles/epoxy nano-composites and their multifunctional effects on curing kinetics", POLYMER TESTING, February 2018 Vol. 66, Num. 0, Page 350-359, February 2018,

Amir Jangizehi, S.Reza Ghaffarian Anbaran, Mostafa Ahmadi, "Dynamics of entangled supramolecular polymer networks in presence of high?order associations of strong hydrogen bonding groups", POLYMERS FOR ADVANCED TECHNOLOGIES, January 2018 Vol. 29, Num. 2, Page 726-735, January 2018,

Elham Rezvanpanah, S.Reza Ghaffarian Anbaran, Ernesto Di Maio, "Carbon nanotubes in microwave foaming of thermoplastics", CARBON, September 2017 Vol. 125, Num. 0, Page 32-38, September 2017,

H. Saghafi, S.Reza Ghaffarian Anbaran, D. Salimi-Majd, H.A. Saghafi, "Investigation of interleaf sequence effects on impact delamination of nano-modified woven composite Laminates using cohesive zone model", COMPOSITE STRUCTURES, April 2017 Vol. 166, Num. 0, Page 49-56, April 2017,

Amir Monemian Esfahani, Mohsen Bahrami, S.Reza Ghaffarian Anbaran, "Forced transverse vibration analysis of a circular viscoelastic polymeric piezoelectric microplate with fluid interaction", Australian Journal of Mechanical Engineering, February 2017 Vol. 16, Num. 1, Page 31-42, February 2017,

Payam Molla Abbasi, S.Reza Ghaffarian Anbaran, Erfan Dashtimoghadam, "Wrapping Carbon Nanotubes by Biopolymer Chains: Role of Nanointerfaces in Detection of Vapors in Conductive Polymer Composite Transducers", POLYMER COMPOSITES, September 2016 Vol. 37, Num. 9, Page 2803-2810, September 2016,

H. Saghafi, S.Reza Ghaffarian Anbaran, Tommaso .Mario Brugo, Giagiacomo Minak, Andrea Zucchelli, H.A. Saghafi, "The effect of nanofibrous membrane thickness on fracture behaviour of modified composite laminates – A numerical and experimental study", COMPOSITES PART B-ENGINEERING, July 2016 Vol. 101, Num. 0, Page 116-123, July 2016,

Naeemeh Shirakbari, S.Reza Ghaffarian Anbaran, Seyed Mohsen Mohseni, "Fabrication and simulation of inverse poly(ferrocenylmethylvinylsilane)/ silica opal structures and their optical properties", JOURNAL OF COMPOSITE MATERIALS, July 2016 Vol. , Num. 0, Page 0-0, July 2016,

Amir Monemian Esfahani, Mohsen Bahrami, S.Reza Ghaffarian Anbaran, "Forced vibration analysis of a viscoelastic polymeric piezoelectric microplate with fluid interaction", MICRO & NANO LETTERS, April 2016 Vol. 0, Num. 0, Page 1-7, April 2016,

Majid Karami Majoomerd, Marziyeh Khatibzadeh, S.Reza Ghaffarian Anbaran, Armina Abbasi, "Resistance Properties of Printed Polyolefin Films u sing Water-Based Inks", Progress in Color, Colorants and Coatings, April 2015 Vol. 8, Num. 3, Page 207-217, April 2015,

Mohammad Fasihi Dastjerdy, Hamid Garmabi, S.Reza Ghaffarian Anbaran, Masahiro Ohshima, "A Comparative Study on Thermomechanical and Rheological Characteristics of Graphite/Polypropylene Nanocomposites: Highlighting the Role of Mixing", JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, March 2015 Vol. 21, Num. 1, Page 12-17, March 2015,

Mohammad Mahdi Hasani Sadrabadi, Fatemeh Sadat Majedi, Van Dersal, Erfan Dashtimoghadam, S.Reza Ghaffarian Anbaran, A Bertsch, H Moaddel, P Renaud, "Morphological tuning of polymeric nanoparticles via microfluidic platform for fuel cell applications", JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, November 2014 Vol. 134, Num. 46, Page 18904-18907, November 2014,

Payam Molla Abbasi, S.Reza Ghaffarian Anbaran, "Decoration of carbon nanotubes by chitosan in aDecoration of carbon nanotubes by chitosan in a nanohybrid conductive polymer composite for detection of polar vapours", RSC Advances, July 2014 Vol. 4, Num. 0, Page 30906-30913, July 2014,

Seifolah Jamalpour, S.Reza Ghaffarian Anbaran, "Investigation of Cell Structure and Expansion Ratio of Microcellular Polypropylene Nanohomocomposites Prepared by a Solid-State Process", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, May 2014 Vol. 53, Num. 0, Page 1421-1430, May 2014,

Amir Jangizehi, S.Reza Ghaffarian Anbaran, Elahe Kowsarie, رسول ناصری پورتکلو, "Supramolecular Polymer Based on Poly (Ethylene-co-Vinyl Alcohol)-g-Ureidopyrimidinone: Self-Assembly and Thermo-Reversibility", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, April 2014 Vol. 53, Num. 5, Page 848-860, April 2014,

Amir Babaei, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Khorasani, Mehdi Haji Abdolrasouli, "Thermal and Mechanical Properties of Ultra High Molecular Weight Polyethylene Fiber Reinforced High-Density Polyethylene Homocomposites: Effect of Processing Condition and Nanoclay Ad", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, April 2014 Vol. 53, Num. 5, Page 829-847, April 2014,

Zahra Khubi Arani, S.Reza Ghaffarian Anbaran, Gity Mir Mohamad Sadeghi, "Synthesis of flexible elastomeric polyurethane films with high elasticity and evaluation of their structural permanency", JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, January 2014 Vol. 2014, Num. 51, Page 180-188, January 2014,

Mahdi Tohidian, S.Reza Ghaffarian Anbaran, Seed Amadodin Shakeri, G Bahlake, "Sulfonated Aromatic Polymers and Organically Modified Montmorillonite Nanocomposite Membranes for Fuel Cells Applications", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, November 2013 Vol. 52, Num. 11, Page 1578-1590, November 2013,

Mohammad Fasihi Dastjerdy, Hamid Garmabi, S.Reza Ghaffarian Anbaran, Masahiro Ohshima, "Preparation of highly dispersed expanded graphite/polypropylene nanocomposites via low temperature processing", JOURNAL OF APPLIED POLYMER SCIENCE, November 2013 Vol. 130, Num. 3, Page 1834-1839, November 2013,

M Fallahi, Mohammad Mahdi Hasani Sadrabadi, S.Reza Ghaffarian Anbaran, علی مددی, "Investigation of the effects of AMPS-modified nanoclay on fuel cell performance of sulfonated aromatic proton exchange membranes", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, October 2013 Vol. 38, Num. 32, Page 14076-14084, October 2013,

Mohammad Mahdi Hasani Sadrabadi, S.Reza Ghaffarian Anbaran, Philippe Renaud, "Nafion/benzotriazole functionalized montmorillonite nanocomposites: novel high-performance proton exchange membranes", RSC Advances, August 2013 Vol. , Num. 3, Page 19357-19365, August 2013,

Mahdi Tohidian, S.Reza Ghaffarian Anbaran, Seed Amadodin Shakeri, Erfan Dashtimoghadam, Mohammad Mahdi Hasani Sadrabadi, "Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications", JOURNAL OF SOLID STATE ELECTROCHEMISTRY, August 2013 Vol. 17, Num. 8, Page 2123-2137, August 2013,

Hooman Hosseini, S.Reza Ghaffarian Anbaran, محمد تیموری, علیرضا معینی, Hossein Eivaz Mohammadloo, "Carbon Foam from two step polymerization of coal tar pitch: synthesis and characterization", , July 2013 Vol. 1, Num. 5, Page 325-336, July 2013,

Seed Amadodin Shakeri, S.Reza Ghaffarian Anbaran, Mahdi Tohidian, G Bahlake, Shahrouz Taranejoo, "Polyelectrolyte Nanocomposite Membranes, Based on Chitosan-phosphotungstic Acid Complex and Montmorillonite for Fuel Cells Applications", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, June 2013 Vol. 52, Num. 9, Page 1226-1241, June 2013,

Mahdi Roohnikan, Morteza Ebrahimi, S.Reza Ghaffarian Anbaran, Nobuyuki Tamaoki, "Supramolecular self-assembly of a novel hydrogen-bonded cholesteric liquid crystal exhibiting macromolecular behaviour", LIQUID CRYSTALS, March 2013 Vol. 40, Num. 3, Page 314-320, March 2013,

Noushin Hasanabadi, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Hasani Sadrabadi, "Nafion-based magnetically aligned nanocomposite proton exchange membranes for direct methanol fuel cells", SOLID STATE IONICS, February 2013 Vol. 232, Num. 0, Page 58-67, February 2013,

Amir Babaei, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Khorasani, ُSiamak Baseghi, "Influence of Compatibilizer-Type and Processing Approach on the Dispersion of OMMT in High-Density Polyethylene Matrix", JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, February 2012 Vol. 2012, Num. 51, Page 481-495, February 2012,

Noushin Hasanabadi, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Hasani Sadrabadi, "Magnetic field aligned nanocomposite proton exchange membranes based on sulfonated poly (ether sulfone) and Fe2O3 nanoparticles for direct methanol fuel cell application", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, September 2011 Vol. 36, Num. 0, Page 15323-15332, September 2011,

Payam Molla Abbasi, S.Reza Ghaffarian Anbaran, Ehsan Danesh, "Porous carbon nanotube/PMMA conductive composites as a sensitive layer in vapor sensors", SMART MATERIALS & STRUCTURES, August 2011 Vol. 2011, Num. 20, Page 105012-105020, August 2011,

Ehsan Danesh, S.Reza Ghaffarian Anbaran, Payam Molla Abbasi, "Non-solvent induced phase separation as a method for making high-performance chemiresistors based on conductive polymer nanocomposites", SENSORS AND ACTUATORS B-CHEMICAL, January 2011 Vol. 2011, Num. 155, Page 562-567, January 2011,

Alireza Azizi, Majid Abdouss, S.Reza Ghaffarian Anbaran, Naghmeh Arabzadeh, "Characterization and studies on grafting of ferroelectric liquid Crystal onto polybutylacrylate", MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, August 2010 Vol. 41, Num. 2, Page 111-114, August 2010,

Mohammad Mahdi Hasani Sadrabadi, S.Reza Ghaffarian Anbaran, Nassir Mokarram Dorri, Erfan Dashti Moghadam, Fateme Sadat Majedi, "Effects of Organically Modified Nanoclay on the Transport Properties and Electrochemical Performance of Acid-Doped Polybenzimidazole Membranes", JOURNAL OF APPLIED POLYMER SCIENCE, July 2010 Vol. 117, Num. 2, Page 1227-1233, July 2010,

Mohammad Mahdi Khorasani, S.Reza Ghaffarian Anbaran, Seyed Hadi Goldansaz, Naser Mohammadi, Amir Babaei, "Solid- state microcellular foaming of PE/PE composite systems, investigation on cellular structure and crystalline morphology", COMPOSITES SCIENCE AND TECHNOLOGY, July 2010 Vol. 70, Num. 1, Page 1942-1949, July 2010,

Mohammad Mahdi Khorasani, S.Reza Ghaffarian Anbaran, Amir Babaei, Naser Mohammadi, "Foaming Behavior and Cellular Structure of Microcellular HDPE Nanocomposites Prepared by a High Temperature Process", JOURNAL OF CELLULAR PLASTICS, March 2010 Vol. 46, Num. 2, Page 173-190, March 2010,

Mohammad Mahdi Hasani Sadrabadi, Erfan Dashti Moghadam, S.Reza Ghaffarian Anbaran, Mahdi Heidari, Homayoun Moadell, "Novel high-performance nanocomposite proton exchange membranes based on poly (ether sulfone)", , January 2010 Vol. , Num. 35, Page 0-0, January 2010,

Mohammad Mahdi Hasani Sadrabadi, S.Reza Ghaffarian Anbaran, Erfan Dashti Moghadam, [en-name N/A], "Characterization of nanohybrid membranes for direct methanol fuel cell applications", , November 2009 Vol. , Num. 180, Page 0-0, November 2009,

Alireza Zahedi, Mehdi Rafizadeh, S.Reza Ghaffarian Anbaran, "Unsaturated Polyester Resin Via Chemical Recycling of off-Grade Poly(Ethylene Terephthalate)", , October 2009 Vol. , Num. 58, Page 0-0, October 2009,

Mohammad Mahdi Hasani Sadrabadi, Erfan Dashti Moghadam, S.Reza Ghaffarian Anbaran, "Evaluation of Fuel Cell Performance of Nafion /Molecular Sieves Nanocomposite Membranes", ECS Transactions (ECST), June 2009 Vol. 17, Num. 1, Page 269-276, June 2009,

Alireza Sharif, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "model prediction of the escr of semicrystalline Polyethylene:Effects of Melt Cooling Rate", , May 2009 Vol. , Num. 112, Page 0-0, May 2009,

Alireza Sharif, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "Practical Work of Crack Growth and Environmental Stress Cracking Resistance of Semicrystalline Polymers", , May 2008 Vol. , Num. 110, Page 0-0, May 2008,

Mohammad Mahdi Hasani Sadrabadi, S.Reza Ghaffarian Anbaran, [en-name N/A], Homayoun Moadell, "Preparation Characterization of Novel Ionoic Polymers to be Used as Artificial Muscles", , May 2008 Vol. , Num. 4, Page 0-0, May 2008,

Mohammad Mahdi Hasani Sadrabadi, Shahriar Hojati Emami, S.Reza Ghaffarian Anbaran, Homayoun Moadell, "Nanocomposite Membranes Made From Sulfonated Poly(Ether Ether Ketone )and Montmorillonite Clay for Fuel Cell Applications", , May 2008 Vol. , Num. 22, Page 0-0, May 2008,

Payam Khodaparast, S.Reza Ghaffarian Anbaran, Narges Yousefi Mehr, "Electrode structures in high strain actuator technology", , November 2007 Vol. , Num. 11, Page 0-0, November 2007,

Morteza Ghafoori, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "The role of joint viscoelastic function in the adhesion of low- density polyethylene to thermoplastic starch", , May 2007 Vol. , Num. 11, Page 0-0, May 2007,

Payam Khodaparast, S.Reza Ghaffarian Anbaran, Seyed Mohammadreza Khosroshahi, "Effect of different electrode materials on the performance of smart composite actuators based on dielectric elastomers", , February 2007 Vol. , Num. 1, Page 0-0, February 2007,

Seyed Mohammadreza Khosroshahi, S.Reza Ghaffarian Anbaran, Payam Khodaparast, "Performance of a Dielectric Elastomer Generator Diaphragm as a Smart Composite at Different Pre-Strain Levels", , January 2007 Vol. , Num. 1, Page 0-0, January 2007,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Afroz Molaeyi, "The effect of curing reaction on mesophase-rich islands of segmented main chain liquid crystalline oligoesters", , November 2006 Vol. , Num. 63, Page 0-0, November 2006,

Golrokh Heidari Hamedani, Morteza Ebrahimi, S.Reza Ghaffarian Anbaran, "Synthesis and Kinetics Study of Vinyl Ester Resin in the Presence of Triethylamine", , November 2006 Vol. , Num. 0, Page 0-0, November 2006,

Morteza Ghafoori, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "Resistance -to-Flow Analysis in Low Density Polyethylene/Plasticized Starch Blends Containing Compatibilizers With Attractive and Repulsive Interactions", , September 2006 Vol. , Num. 15, Page 0-0, September 2006,

Morteza Ghafoori, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch", , August 2006 Vol. , Num. 3, Page 0-0, August 2006,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Faramarz Afshar Taromi, Naser Mohammadi, "The Preparation and Properties of Segmented-Chain Liquid Crystalline Polyesters Based on 4,4 Dihydroxybiphenyl by Interfacial Polycondensation", , November 2005 Vol. , Num. 98, Page 0-0, November 2005,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Faramarz Afshar Taromi, Afroz Molaeyi, "Thermoanalytical study of the cure characteristics of a main-chain liquid crystalline oligoester model-free approach to kinetic analysis of non-isothermal data", , January 2005 Vol. , Num. , Page 0-0, January 2005,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Three-dimensional process cycle simulation of composite parts manufactured by resin transfer modeling", , September 2004 Vol. 0, Num. 65, Page 0-0, September 2004,

Akbar Shojaei Soghorloo, F. Trochu, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, L. Lessard, "An experimental study of saturated and unsaturated permeabilities in resin transfer modeling based on unidirectional flow measurements", JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, September 2004 Vol. 23, Num. 14, Page 1515-1522, September 2004,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Faramarz Afshar Taromi, Afroz Molaeyi, "Liquid crystalline thermosets as binder for powder coatings thermoanalytical study of the cure characteristics of a carboxylated main chain liquid crystalline oligoester", , September 2004 Vol. , Num. 50, Page 0-0, September 2004,

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Delaram Fallahi, "Sensitivity of surface free energy analysis methods to the contact angle changes attributed to the thickness effect in thin films", , August 2004 Vol. , Num. , Page 0-0, August 2004,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Majid Abdouss, "Synthesis of main chain liquid crystaline polyesters", , June 2004 Vol. , Num. 13, Page 0-0, June 2004,

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Delaram Fallahi, "The contact angle of thin-uncured epoxy films:thickness effect", , April 2004 Vol. , Num. , Page 0-0, April 2004,

Mahmood Masoomi, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "The effect of processing conditions and matrix type on the interface of polyethylene-fibre/polyethylene-matrix composites", , April 2004 Vol. , Num. 5, Page 0-0, April 2004,

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Majid Abdouss, Faramarz Afshar Taromi, Naser Mohammadi, Behrouz Zanganeh-Rangbar, Zahra Ranjbar, "Synthesis of main chain liguid crystalline polyesters based on mesogenic monomers with controlled transition temperatures", , April 2004 Vol. , Num. 2, Page 0-0, April 2004,

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "Study on different planforms of paints solvents and the effect of surfactants (on them )", , April 2004 Vol. , Num. 49, Page 0-0, April 2004,

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "Investigation of factors affecting stratification phenomenon in epoxy-acrylic coatings", , February 2004 Vol. , Num. , Page 0-0, February 2004,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Numerical simulation of three-dimensional mold filling in resin transfer molding", JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, November 2003 Vol. 22, Num. 16, Page 1497-1533, November 2003,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Simulation of the three - dimensional non - isothermal mold filling process in resin transfer molding", COMPOSITES SCIENCE AND TECHNOLOGY, October 2003 Vol. 63, Num. 1, Page 1931-1948, October 2003,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Modeling and simulation approaches in resin transfer molding process: a review", POLYMER COMPOSITES, August 2003 Vol. 24, Num. 4, Page 525-544, August 2003,

Gholam Ali Farzi, S.Reza Ghaffarian Anbaran, "Microwave attenuating polymeric coatings", , June 2003 Vol. , Num. 12, Page 0-0, June 2003,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Numerical analysis of controlled injection strategies in resin transfer molding", JOURNAL OF COMPOSITE MATERIALS, June 2003 Vol. 37, Num. 11, Page 1011-1035, June 2003,

Mohammadreza Moghbeli, Naser Mohammadi, Reza Baghry, S.Reza Ghaffarian Anbaran, "Wet spinning of low gel content SBR/PMMA core/shell particles dispersed in a good solvent for the shell", , June 2003 Vol. , Num. 44, Page 0-0, June 2003,

Nader Taheri Qazvini, Naser Mohammadi, S.Reza Ghaffarian Anbaran, Homa Asempour, Mohammad Haghighat Kish, "Quantitative orientational charactirization of low_density polyethylene blown films by x-ray and birefringence", , December 2002 Vol. , Num. 6, Page 0-0, December 2002,

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Numerical simulation of three- dimensional mold filing process in resin transfer molding using quasi-steady state and partial saturation formulations", COMPOSITES SCIENCE AND TECHNOLOGY, May 2002 Vol. 62, Num. 1, Page 861-879, May 2002,

J.M. Methven, S.Reza Ghaffarian Anbaran, A.A. Abidin, "Manufacture of FRP by microwave Assisted pultrusion", , August 2000 Vol. , Num. 4, Page 0-0, August 2000,

Zahed Ahmadi, S.Reza Ghaffarian Anbaran, [en-name N/A], "Continuous melt impregnation process:materials parameters", , April 2000 Vol. , Num. 2, Page 0-0, April 2000,

Conference Papers

Portal Records

Mojtaba Nasiri Nezhad, S.Reza Ghaffarian Anbaran, Mahdi Tohidian, "Functionalized chitin nanowhiskers for application in direct methanol fuel cell membranes ", 14th International Seminar on Polymer Science and Technology, November 2020

Ashkan Aslani, Manouchehr Khorasani, S.Reza Ghaffarian Anbaran, N.Bahrami-Adeh, "synthesis and characterization of PNS used as a dispersing agent ", 6th international color and coating congress, ICCC2015, November 2015

Mir Ahmad Sadat, Mehdi Rafizadeh, S.Reza Ghaffarian Anbaran, "Effect of temperature on viscosity of modified unsaturated polyester resins ", 11th International Seminar on Polymer Science and Technology, October 2014

Naeemeh Shirakbari, S.Reza Ghaffarian Anbaran, "Synthesis and photolytic ring-opening polymerization (ROP) of silicon bridge[1]silaferrocenophane ", 11th International Seminar on Polymer Science and Technology, October 2014

Amir Jangizehi, S.Reza Ghaffarian Anbaran, Mostafa Ahmadi, "Thermal behaviour of side-chain supramolecular polymers designed with self-complementary quadruple hydrogen bonds ", 11th International Seminar on Polymer Science and Technology, October 2014

Saeed Sadeghi, Mohsen Ghazizadeh, S.Reza Ghaffarian Anbaran, "Simulation and Fabrication of Polystyrene Based Photonic Crystals Operating in Visible Light ", 11th International Seminar on Polymer Science and Technology, October 2014

Payam Molla Abbasi, S.Reza Ghaffarian Anbaran, "Physical Decoration of CNTs in Conductive Polymer Composites: A high Performance Vapor Detector ", 11th International Seminar on Polymer Science and Technology, October 2014

Tahereh Aghaali, S.Reza Ghaffarian Anbaran, "Elaboration and Investigation of response mechanism in polymer- carbon nanotube composite vapor sensors ", 11th International Seminar on Polymer Science and Technology, October 2014

Majid Karami Majoomerd, Marziyeh Khatibzadeh, S.Reza Ghaffarian Anbaran, "Adhesion and resistance properties of water based flexographic ink on polyolefins ", 5th International Color and Coatings Congress -ICCC2013, December 2013

Mahdi Tohidian, S.Reza Ghaffarian Anbaran, Seed Amadodin Shakeri, Mohammad Mahdi Hasani Sadrabadi, "Organically Modified Nanoclays and Chitosan–Phosphotungstic Acid Complex Nanocomposites as Polyelectrolytes for Fuel Cells Applications ", 6th Iranian fuel cell seminar, March 2013

Zahra Khubi Arani, S.Reza Ghaffarian Anbaran, Gity Mir Mohamad Sadeghi, "Synthesis of very Flexible Elastomeric Polyurethane Films with High Elasticity ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

Hooman Hosseini, S.Reza Ghaffarian Anbaran, Mohammad Teymouri, Ali Reza Moeini, "Liquid Crystal Formation by Polymerization of Coal Tar Pitch under Heat and Pressure ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

Amir Jangi Zehi, S.Reza Ghaffarian Anbaran, Elahe Kowsarie, "Synthesis and Thermo-reversibility of Poly (ethylene-co-vinyl alcohol)-g-Ureidopyrimidinone Groups ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

G Bahlake, S.Reza Ghaffarian Anbaran, Mahdi Tohidian, Seed Amadodin Shakeri, Erfan Dashtimoghadam, Mohammad Mahdi Hasani Sadrabadi, "Experimental and Simulation Investigation of Sulfonated Aromatic Polymers as High Performance Polyelectrolyte Membranes for Fuel Cell Applications ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

Seyyed Tohid Ghaznavi, S.Reza Ghaffarian Anbaran, Seyfolah Jamalpour, "Effect of temperature on morphology of the random propylene-ethylene copolymer composite with Nanoclay and polypropylene fiber ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

Mahdi Tohidian, S.Reza Ghaffarian Anbaran, Seed Amadodin Shakeri, G Bahlake, Erfan Dashtimoghadam, Mohammad Mahdi Hasani Sadrabadi, "Chitosan–Phosphotungstic acid Complexe and Montmorillonite Nanocomposite Membranes as High Performance Materials for Fuel Cell Applications ", ISPST 2012 International Seminar on Polymer Science &Terchnology, October 2012

Mahdi Tohidian, Seed Amadodin Shakeri, S.Reza Ghaffarian Anbaran, G Bahlake, Erfan Dashtimoghadam, Mohammad Mahdi Hasani Sadrabadi, "Determining The Effect Of Organically Modified Montmorillonite On Polyelecterolyte Membranes based on Sulfonated Aromatic Polymers To Used In Direct Methanol Fuel Cells ", Polymer Processing Society - PPS 2011, November 2011

Razie Mohammad Pour, Mehdi Rafizadeh, S.Reza Ghaffarian Anbaran, "Study of Electrospinning Process: Effect of Viscosity on Morphology of Electrospun PAN/ MWNTs Nanofibers ", Polymer Processing Society PPS 2011 Asia/Australia Regional Meeting, November 2011

Mahdi Roohnikan, Morteza Ebrahimi, S.Reza Ghaffarian Anbaran, "Synthesis and characterization of a chiral nematic liquid crystalline acrylic based monomer possessing unique color effects appropriate for brand new organic pigments applicaion ", 4th international color and coatings congress (ICCC2011, November 2011

Elham Rezvan Panah, S.Reza Ghaffarian Anbaran, Mehdi Rafizadeh, Naser Mohammadi, "Simulation of the Crystallinity Effect on Cell Growth in Semi-Crystalline Microcellular Foams by Semi Solid-State Batch Foaming Process ", Polymer Processing Society PPS 2011 Asia/Australia Regional Meeting, November 2011

Zahra Khubi Arani, S.Reza Ghaffarian Anbaran, Gity Mir Mohamad Sadeghi, "Photocrosslinking of highly soften TPUs with UV radiation and comparison of their mechanical properties with the TPU and UV Curable acrylated PU with similar structure ", PPS 27- 27th Annual Meeting of the Polymer Processing Society, May 2011

S.Reza Ghaffarian Anbaran, "Microcellular composites ", The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2, December 2010

Seed Amadodin Shakeri, Mehdi Tohidiyan, S.Reza Ghaffarian Anbaran, Erfan Dashtimoghadam, Mohammad Mahdi Hasani Sadrabadi, "Polymeric nanocomposite membrane as high performance materials for fuel cells applications ", , The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2, December 2010

Amir Babaei, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Khorasani, "Effect of processing condition on crysatalinity and mechanical properties of PE fiber – PE nanocomposites ", ISPST-2009, October 2009

Ehsan Danesh, S.Reza Ghaffarian Anbaran, "Effect of porosity on response behavior of carnon black PMMA conductive conposite sensors towared methanol vapor ", , April 2009

Nassir Mokarram Dorri, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Hasani Sadrabadi, "Evaluation of the proton conductivity of novel functionalized polymerc memberance ", , June 2008

Mohammad Mahdi Hasani Sadrabadi, Nassir Mokarram Dorri, S.Reza Ghaffarian Anbaran, "Polyelectrolyte memberanes based on polybenzimidazole sulfonated polyphenylene oxide blends for fuel cells applications ", , June 2008

Narges Yousefi Mehr, S.Reza Ghaffarian Anbaran, "Linear electroelstomer roll actuators ", , January 2008

Alireza Sharif, Naser Mohammadi, S.Reza Ghaffarian Anbaran, "Comparison of flory hugging medel its modified version and LCT in predicting a real polyethylene blend phase diagram ", , October 2007

Davoud Zamani, S.Reza Ghaffarian Anbaran, Narges Yousefi Mehr, "Investigation on the Role of Lamination on Performance of a Dielectric Elastomer Generator Diaphragm as a Smart Composite ", , October 2007

Narges Yousefi Mehr, S.Reza Ghaffarian Anbaran, Davoud Zamani, Payam Khodaparast, "Linear electroelastomer roll actuators as artificial muscles ", , October 2007

Mohammad Mahdi Foroughi, S.Reza Ghaffarian Anbaran, "Production and Investigation of Microcellular Silicon Rubber by Physical Foaming Process ", , October 2007

Alireza Zahedi, Mehdi Rafizadeh, S.Reza Ghaffarian Anbaran, "Chemical recycling of off- grade poly (Ethylene terphthalate) via clycolysis method ", , August 2007

Mohammad Abdi, S.Reza Ghaffarian Anbaran, Mohammad Mahdi Khorasani, "Influence of processing conditions on the impregnation and mechanical properties of single polymer polyethylene composites ", , March 2007

Golrokh Heidari Hamedani, Morteza Ebrahimi, S.Reza Ghaffarian Anbaran, "Kinetics Study of Epoxy Vinyl Ester Resin Synthesis ", , November 2006

Seyed Mohammadreza Khosroshahi, S.Reza Ghaffarian Anbaran, Payam Khodaparast, "Performance of a dielectric elastomer generator diaphragm as a smart composite at different pre- strain levels ", , October 2006

Payam Khodaparast, S.Reza Ghaffarian Anbaran, Seyed Mohammadreza Khosroshahi, "effect of different electrode materials on performance of smart composit acturators based on dieletric elastomer ", , October 2006

Naser Mohammadi, Morteza Ghafoori, S.Reza Ghaffarian Anbaran, "Effect of Type, Amount and Viscoelasticity of Compatibilizer on Interfacial Adhesion between polyethylene and Thermoplastic Starch ", , September 2005

Seyed Mohsen Mohseni, Sona Jalilian, S.Reza Ghaffarian Anbaran, Marziyeh Khatibzadeh, "Study of indentation hardness of sol-gel based hybrid nanocomposites on polycarbonate ", , September 2005

Mahmood Masoomi, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "Influence of Matrix Type and processing Conditions on he Formation and Morphology of the Transcrystalline ayer in PE/PE Composites ", , September 2005

Gity Mir Mohamad Sadeghi, [en-name N/A], S.Reza Ghaffarian Anbaran, Faramarz Afshar Taromi, "On _ line preparation of polyurethane structural adhesives by reactive extrusion : comparion of adhesion strength in metal _ metal and metal _ glass bonding ", , June 2005

Maryam Haji Hosseini, S.Reza Ghaffarian Anbaran, "an investigation of thermochemical processes invoived in carbon formation from pf and phenal _ furforal ", , August 2003

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "surface free energy of multigroup oligomeric chains: Epoxy systems ", , May 2003

Ali Abbasian, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "Stratification of epoxy _ Acrylic coatings: effect of thickness and Gel time ", , May 2003

Mahmood Masoomi, S.Reza Ghaffarian Anbaran, Naser Mohammadi, "Study of the Interface, processing conditions and the type of matrix in PE/PE Composites ", , May 2003

Amir Mowlaei, S.Reza Ghaffarian Anbaran, Ali Jannesayladany, "The Use of statistically Designed Experiments in preparation of waterborne Dispersions of Epoxy Resins ", , May 2003

Hamid Bakhsheshi, S.Reza Ghaffarian Anbaran, Fathollah Moztarzadeh, "Wear and friction Mechanisms in self Lubricating PTFE Based composites filled with (copper powder/Milled Glass fiber) Hybrid in sliding Motion ", , May 2003

Ali Jannesayladany, S.Reza Ghaffarian Anbaran, Majid Abdouss, "Design of Main chain Liquid crystalline polyesters Based on Mesogenic Monomers with controlled transition temperatures ", , May 2003

S.Reza Ghaffarian Anbaran, Mahdi Pakravan, Fathollah Moztarzadeh, "Friction and Wear properties of short fiber Reinforced phenolic Resin composites in Dry sliding ", , May 2003

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Simulation of the Three-Dimensional Filling Process in Resin Transfer Molding Using an iterative Method ", , July 2002

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Numerical Analysis of Filling Process in Resin Transfer Molding With Controlled Injection Strategies ", , July 2002

Ghodratollah Hashemi Motlagh, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Hossein Nazokdast, "Particulate composites based on ground rubber tire and polyethylene: effect of DCP on mechanical properties processing and leak rate of porous pipe ", , July 2002

Ghodratollah Hashemi Motlagh, S.Reza Ghaffarian Anbaran, Naser Mohammadi, Hossein Nazokdast, "Effects of DCP on processing,mechanical properties and leak rates of porous pipes made from polyethylene and ground rubber tire ", , July 2002

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Analysis of Mixed Initiators Effect on Curing Step in Resi transfer Molding using numerical Sinulation ", , August 2001

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, "Three _ Dimensional Resin Flow Simulation During Filling Processin Resin transfer Molding ", , March 2001

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Effect of Boundary condition type on mold Filling in RTM process ", , August 2000

S.Reza Ghaffarian Anbaran, Ghodratollah Hashemi Motlagh, Naser Mohammadi, Hossein Nazokdast, "particulate composite based on GRT and PE manufacturing of porous pipe and effects of different PES on mech .prop. ", , August 2000

Mohamad Sabramooz, Naser Mohammadi, S.Reza Ghaffarian Anbaran, Reza Javanmardi, "Gel spinning of high modulus polyethylene fibers ", , August 2000

Akbar Shojaei Soghorloo, S.Reza Ghaffarian Anbaran, S.M.H. Karimian, "Simulation of three - dimensional isothermal Mold filling in Resin transfer molding process ", , March 2000

Zahra Ranjbar, Siamak Moradian, S.Reza Ghaffarian Anbaran, "Sgnthesis & Properties of water soluble epoxy resins for CEC ", , March 2000

Zahra Ranjbar, Siamak Moradian, S.Reza Ghaffarian Anbaran, "synthesis and properties of water soluble epoxy resins for cathodically electrodeposited coating ", , March 2000

S.Reza Ghaffarian Anbaran, Akbar Shojaei Soghorloo, "Modeling & Optimization Of RTM Process As a High Volume Production Technique ", , August 1998

S.Reza Ghaffarian Anbaran, Zahed Ahmadi, Davoud Amiri, "The investigation of melt impregnation process parameters in the manufacturing of LFTP composites ", , August 1998

Taught Courses

Course title

Description

Headlines

Date

Heat Transfer

To become familiar with the fundamentals and calculations in heat transfer

Spring 2024

Composite Engineering

Introducing the fundamentals of micromechnical design calculation and materials for composite structures

Spring 2024

Reinforced Plastics

Introducing the fundamentals and advanced design calculations and processing of composites

Spring 2024

Composite Engineering

Introducing the fundamentals of micromechnical design calculation and materials for composite structures

Fall 2023

Heat Transfer

To become familiar with the fundamentals and calculations in heat transfer

Fall 2023

Heat Transfer

To become familiar with the fundamentals and calculations in heat transfer

Spring 2023

Composite Engineering

Introducing the fundamentals of micromechnical design calculation and materials for composite structures

Spring 2023

Reinforced Plastics

Introducing the fundamentals and advanced design calculations and processing of composites

Spring 2023

Composite Engineering

Introducing the fundamentals of micromechnical design calculation and materials for composite structures

Fall 2022